aka.ms/StartLinking: pair your iPhone with Windows (Bluetooth)
Your PC is showing https://aka.ms/StartLinking because you chose iPhone and "Continue manually without a QR code." Open that link on your iPhone, not the PC. iPhone connects over Bluetooth, so the steps differ from Android. Scanned the PC's QR code with your iPhone's Camera instead? That opened a temporary copy of the app, not the app itself: what it is, and the way out.
By Aaron Kransdorf, Founder & Author · Tested on iPhone · Link to Windows (iOS) 1.26101.20 · Phone Link 1.26092.119.0 · Last verified November 10, 2026
You're seeing https://aka.ms/StartLinking on your PC, but it's meant to be opened on your iPhone. Typing it into your computer's browser does nothing useful.
Open it on your iPhone: it takes you to the Link to Windows app (through the App Store, if it isn't installed yet), which pairs with your PC over Bluetooth.
Pair your iPhone over Bluetooth
- On your iPhone, turn on Bluetooth, open Safari and type https://aka.ms/StartLinking into the address bar, then tap Go (not a search suggestion). Tap Get started, then Continue, and install Link to Windows from the App Store page that opens.
- Open Link to Windows, tap Enable paste, then Allow Paste: it jumps to "Continue pairing with Bluetooth". Tap Continue and Allow Bluetooth. Don't scan the PC's QR code with the iPhone's Camera before the app is installed: that opens a temporary copy, not the app (what that copy is).
- Confirm the 6-digit code. Your PC and iPhone show the same six digits. Check they match, then press Pair on both at the same time.
- Allow notifications, then choose Set up file sharing (sign in with the Microsoft account shown on your PC) or Set up later. When the PC says "You're almost there", open Settings → Bluetooth on the iPhone, tap the ⓘ next to your PC's name, turn on the three switches, and click Continue.
Before you start: turn on Bluetooth on both devices and disconnect every other Bluetooth device from both, and put them on the same network for the smoothest connection.
Set expectations first: iPhone gets a smaller Phone Link feature set than Android: messages, calls, notifications, and photo and file transfer, but no photo browsing, no app mirroring and no full screen mirroring, because Apple keeps deeper integration for its own ecosystem. It also asks for fewer permissions than Android. Full iPhone vs Android comparison →
In this video · tap a step to jump to it
Pairing an iPhone during Windows' first-run (the out-of-box experience)? Don't. Finish Windows setup and reach the desktop first; Bluetooth pairing in particular is much steadier once Windows is fully activated and loaded. In my testing, pairing during OOBE was more confusing and prone to half-connecting, glitching, or failing outright. Past setup, it went smoothly nearly every time.
The full walkthrough: every screen, in order (tested on iPhone 17 Pro Max)
Every screen of the current iPhone-to-Windows flow, in order, as it ran on my iPhone 17 Pro Max and a Windows 11 PC. iPhone pairs over Bluetooth, so it differs from Android, and the exact wording on these screens matters, so I quote it as it appears.
This is the route I recommend: install Link to Windows first, by typing the link.
- Already scanned the PC's QR code with your iPhone's Camera? That's a different path: what it opened, and the way out.
- Already looking at "Pair your devices without a QR code" on your PC? Skip to step 5.
PC: Open Phone Link. Any of these gets you there:
Using your browser: type www.aka.ms/PhoneLink or www.aka.ms/LinkPhoneQR exactly as shown, straight into the address bar, not into a search engine's search box. (A search adds steps, and you may never reach the right page.)
The browser asks"Open Phone Link?" ("https://www.aka.ms wants to open this application.")
Click Open Phone Link. Ticking "Always allow www.aka.ms to open links of this type in the associated app" skips that question next time.
If Phone Link isn't installed, the same link takes you to it in the Microsoft Store; install it there. Don't search the Store for it: the Store's search doesn't show Phone Link.
From the Start menu: on an up-to-date Windows 11 PC, press the Windows key. Attached to the right side of Start's main panel is a phone pane, "Access your mobile device here", with Android and iPhone options.
Choosing iPhone there opens Phone Link straight at "Pair your devices with Bluetooth", so you skip to step 3. (More on the Start-menu pane; for iPhone, it needs a PC with Bluetooth LE.)
- By name: type "Phone Link" into the search box on the taskbar or in Start, and open it.
- From Windows Settings: on Settings → Bluetooth & devices → Mobile devices, the Add device button beside Add a mobile device opens Phone Link on its device choice (step 2). Once a phone is linked, its own page there (the › next to its name) also has an Open Phone Link button, under Additional settings.
- Directly: press Windows key + R, type ms-phone: in the Run box that opens, and press Enter. This one works only once Phone Link is installed.
PC: the browser's "Open Phone Link?" prompt
PC: the Start menu's phone pane, "Access your mobile device here", with Android and iPhone PC: Check the account, then choose iPhone.
On your PCPhone Link opens on its welcome screen, "Use your mobile device from your PC", showing the Microsoft account it's signed into.
- To use a different one, click Switch account, just below it, and sign in with that account.
- If you skipped the Microsoft account when you set up Windows, never signed in, or signed out, the screen says "Sign in to your Microsoft account" in its place; sign in there. You can't skip it: Phone Link needs a Microsoft account.
On iPhone, the account doesn't decide whether pairing works (Bluetooth does that), but it's the one your iPhone must sign in with if you set up file sharing (step 15), so note it now.
Then, under "Choose your device to get started", pick iPhone.
- Phone Link opened on a phone instead (an Android or another iPhone, listed as if connected but offline)? It still remembers that device: click the gear at the top right of Phone Link (its Settings), open Mobile devices and select Add device, and the welcome screen opens.
- If an Android is linked and the iPhone button does nothing, I've hit that lock too: what freed it.
PC: "Use your mobile device from your PC", with iPhone under "Choose your device to get started" PC: "Pair your devices with Bluetooth."
On your PCThe screen reads "Scan the QR code with your iPhone camera and allow Link to Windows to use Bluetooth."
Under the QR code: "This code expires in 3 minutes" and a Continue manually without a QR code link.
At the bottom: "To be used with this PC, your iPhone must be running iOS 16.0 or later. iPhone is a trademark of Apple Inc.", a Privacy Statement link and Cancel.Don't follow that first line yet. If Link to Windows isn't installed on your iPhone, the Camera doesn't install it: it opens a temporary copy that can pair but can't stay, with a dead end either way (what happens, and the way out).
Click Continue manually without a QR code instead (next step).
The QR code is fine later, scanned from inside the installed app (step 10). It lasts 3 minutes; after that the screen says "Your code has expired. Refresh QR code." Click that for a new one.
PC: "Pair your devices with Bluetooth: Scan the QR code with your iPhone camera and allow Link to Windows to use Bluetooth", with "Continue manually without a QR code" PC: "Pair your devices without a QR code." The screen changes to Microsoft's typed steps:
On your PCPair your devices without a QR code We'll guide you through a short setup process to connect your iPhone and PC. Step 1 Open a browser on your mobile device and type https://aka.ms/startLinking Step 2 When prompted, open Link to Windows at the top of the webpage Pair with a QR code ( Cancel )Leave the PC on this screen; nothing happens here until the pairing code appears (step 13).
Pair with a QR code goes back to the QR screen, which you'll want only if you scan from inside the app (step 10).
Microsoft's Step 2, a prompt at the top of the webpage, didn't appear in my run, because Link to Windows wasn't installed yet: the page walked me to the App Store instead (steps 6 to 8).
PC: "Pair your devices without a QR code", with Step 1, Step 2 and "Pair with a QR code" iPhone: Type the link into the address bar.
- Turn on Bluetooth (Control Center, or Settings → Bluetooth), and disconnect every other Bluetooth device from the iPhone and the PC first (earbuds, a watch, another phone or PC): in my testing, anything else connected caused trouble at every stage (why, and where to disconnect them).
- Open Safari, or any browser, and type https://aka.ms/StartLinking straight into the address bar, then tap the blue arrow (Go) on the keyboard. Capital letters don't matter; startlinking works the same.
- Don't pair the iPhone and PC with each other by hand either; Link to Windows does that itself in step 13 (what pre-pairing does).
- Don't tap the "Google Suggestions" line that appears above with the same text: that runs a Google search instead of opening the link, and a search adds steps, so you may never reach the right page.
iPhone: https://aka.ms/startlinking typed into Safari's address bar, with "Google Suggestions" above iPhone: "Get started."
On your iPhoneThe link opens a Microsoft page (its address ends in phonelink.microsoft.com): "Link to Windows — By selecting "Get started" we will help you get set up to use your mobile device from your PC with Link to Windows."
Tap Get started.
iPhone: "Link to Windows: By selecting "Get started" we will help you get set up to use your mobile device from your PC with Link to Windows." Get started iPhone: The clipboard choice.
Next"Link to Windows — By selecting "Continue" we will copy information to your clipboard to help you get set up in Link to Windows when you launch the app," with Continue and Continue without using my clipboard.
Pick Continue for one screen less later.
What it copies: a single link meant for Link to Windows, with nothing about you, your account or your devices in it: https://pair.phonelink.microsoft.com/
universal/prod?s=1&ss=1&btpv=2& . When the app reads it (step 9), it skips its welcome screen and goes straight to Bluetooth pairing. Without it, you tap through that one extra screen (step 10). Either button leads to the same App Store page next.exp=%7B%22iOSOnboardingWebHandoffEnabled%22:true%7D
iPhone: "By selecting "Continue" we will copy information to your clipboard to help you get set up in Link to Windows when you launch the app." Continue / Continue without using my clipboard iPhone: Install Link to Windows.
App StoreEither button opens Link to Windows' page in the App Store: "Link to Windows — Link your phone and PC," by Microsoft.
Tap Get (a cloud icon instead means you've installed it before; tap that), confirm with Face ID or your password if asked, then tap Open.
- Already installed? The page shows Open straight away. (Every other way to install it is listed below.)
iPhone: "Pair faster with your clipboard."
Link to WindowsLink to Windows opens on "Pair faster with your clipboard — Enable paste from your clipboard for simplified setup," with Enable paste and Continue without using my clipboard.
If you picked Continue in step 7, tap Enable paste.
iOS asks"Link to Windows would like to paste from Safari," with Don't Allow Paste highlighted (iOS's default) and Allow Paste beside it.
Tap Allow Paste, and the app reads the link and jumps straight to "Continue pairing with Bluetooth" (step 11).
- Otherwise tap Continue without using my clipboard and go on to step 10.
Copied the link from aka.ms/linkAccount instead of this page? That one skips pairing: the trap it sets.
iPhone: "Pair faster with your clipboard: Enable paste from your clipboard for simplified setup." Enable paste / Continue without using my clipboard iPhone: The welcome screen. Without the clipboard shortcut you land here:
On your iPhone"Link to Windows — Enjoy calls, text messages, and more from your PC. On your PC open Phone Link and follow the instruction to link your device," with Scan the QR code on your PC, Continue without a QR code and a Privacy Statement link; the ☰ at the top left is the app's menu.
Tap Continue without a QR code: your PC is already on the manual screen (step 4).
- Scan the QR code on your PC opens the app's own scanner instead; to use it, click Pair with a QR code on the PC to bring the code back, then scan it. Scanning inside the app is fine; it's the iPhone's Camera app that leads into the temporary copy.
Both buttons end on the same next screen, and it doesn't matter which of its two screens the PC is showing when you tap Continue without a QR code: the QR code and the manual steps lead to the same pairing.
iPhone: "Enjoy calls, text messages, and more from your PC." Scan the QR code on your PC / Continue without a QR code iPhone: "Continue pairing with Bluetooth."
On your iPhoneUnder the title "Pair your devices": "Continue pairing with Bluetooth — Phone Link requires Bluetooth to access your calls, messages, and notifications from your computer," with Continue and a Microsoft privacy statement link.
Tap Continue.
iPhone: "Continue pairing with Bluetooth: Phone Link requires Bluetooth to access your calls, messages, and notifications from your computer." Continue iPhone: Allow Bluetooth.
iOS asks"Allow "Link to Windows" to find Bluetooth devices? Bluetooth access is required to find and pair with your PC," over a map of nearby devices ("More than 50 devices found" on mine) and the line "Information from Bluetooth devices can be used to determine your location and create a profile of you."
That last line is iOS's wording, not Microsoft's; Microsoft's reason is the line above it.
Tap Allow.
The app shows"Looking for your PC to start Bluetooth pairing," with Get help with pairing your devices under it; that link only opens Microsoft's general Phone Link requirements and setup page, which doesn't cover this screen.
- If it never gets past this while your PC moves on by itself, the two were paired by hand beforehand: what to do.
- Tapped Don't Allow? Here's how to undo it.
iPhone: "Allow "Link to Windows" to find Bluetooth devices? Bluetooth access is required to find and pair with your PC." Don't Allow / Allow Both: Confirm the same 6-digit code, and press Pair on both together.
On your PCYour PC switches to "Pair device? Confirm that this code is shown on your iPhone®. Select Pair on both devices to continue," with six digits, Cancel and Pair.
At the same moment, your iPhone shows:
On your iPhoneBluetooth Pairing Request "[your PC's name]" would like to pair with your iPhone. Confirm that the code "[code]" is shown on "[your PC's name]". Do not enter this code on any accessory. ( Cancel ) ( Pair )Check the digits match, then press Pair on both devices at the same time.
This is the step that fails most often: let even ~5 seconds pass between the two and the PC shows "Unable to complete Bluetooth pairing" with four clean-up steps, while the iPhone shows its own "Unable to complete Bluetooth pairing" with Try again (both screens, and what to do).
There's nothing to type, and this code is never emailed.
PC: "Pair device? Confirm that this code is shown on your iPhone®. Select Pair on both devices to continue." Cancel / Pair
iPhone: "Bluetooth Pairing Request: "[your PC's name]" would like to pair with your iPhone. Confirm that the code "[code]" is shown on "[your PC's name]"." Cancel / Pair iPhone: Let the PC show your notifications.
Once paired, iOS asks"Allow [your PC's name] to Receive Your iPhone Notifications? When connected, all notifications you receive on your iPhone will also be sent to [your PC's name] and may be shown on its display," with Don't Allow and Allow.
Tap Allow if you want your iPhone's notifications on the PC; that's what this prompt switches on.
- Decline and you can still turn it on later: it's the Share System Notifications switch in step 18.
iPhone: "Allow [your PC's name] to Receive Your iPhone Notifications?" Don't Allow / Allow Both: Sign in to link the account (file sharing).
The PC checks your Microsoft account; the iPhone shows "Link your iPhone to your Microsoft account… Continue," then you sign in.
Choose the account already on your PC, the one step 2 showed: the iPhone lists the accounts it has used before, and Sign in with another account adds it if it isn't there.
Make sure it matches, because a different account still pairs, but file sharing then fails later (how that shows up).
- If Microsoft asks you to verify your email here, that's a separate 6-digit code sent to your inbox (the email trap below).
Then"Linking your iPhone and account — please do not close the app."
These are the same account screens you get when you set up file sharing later: aka.ms/AddAccount quotes each one (steps 6 to 9).
iPhone: File sharing is ready.
On your iPhone"You're ready to share files and more with your PC… Go to Phone Link to finish granting notifications, messages, and contacts permissions. Got it."
Then choose your usage-data preference (I declined); either answer is fine and doesn't affect linking.
PC: "You're almost there." The PC asks for the last permissions:
On your PCYou're almost there [your iPhone's name] is paired. We need permission to sync your device's content to your PC. Step 1 On your mobile device, open Bluetooth Settings and find [your PC's name] and tap the ⓘ Step 2 Turn on Share System Notifications to view your mobile notifications on your PC Turn on Show Message Notifications to send and receive SMS messages Turn on Sync Contacts to access your contacts ( Skip ) ( Continue )On the iPhone, open Settings → Bluetooth, tap the ⓘ next to your PC's name and turn on the three switches, then click Continue on the PC.
Skip leads to the same place, Phone Link's connected screen, so it's the switches that matter, not the button: any you leave off just means that content doesn't reach the PC until you turn it on there (what each app asks for).
PC: "You're almost there: [your iPhone's name] is paired. We need permission to sync your device's content to your PC." Skip / Continue Connected.
On your PCThe Phone Link dashboard opens on the PC; for iPhone, its left pane shows your battery only, with no wallpaper or phone image (unlike Android).
On the iPhone, Link to Windows opens on its home screen: "You're ready to enjoy your iPhone from your PC — On your PC, open Phone Link to check your connectivity status. Send messages, make calls, and more," with a Trouble connecting? link.
- If you skipped file sharing, the Received files panel says "Share files between your iPhone and PC. Sign in to set up file share," with Sign in: that's where to start it (aka.ms/AddAccount walks through it, from that button on).
Check messages, calls and notifications, and once file sharing is on, test a small file: in File Explorer on the PC, right-click it and choose Send to my phone.
iPhone: Link to Windows' home screen, "You're ready to enjoy your iPhone from your PC"
Scanned the PC's QR code with your iPhone camera? Here's what opened
The PC's own instruction (step 3) is "Scan the QR code with your iPhone camera," so plenty of people do exactly that before Link to Windows is installed. What opens isn't the app: it's a temporary copy of it, built to pair and then disappear. Here's every screen, the two dead ends, and the way out.
Short version: tap App Store and install the app. A pairing you finished in the copy isn't lost.
The Camera spots the code.
Point the iPhone's Camera at the PC's QR code, in its normal Photo mode (in Portrait, Video or the other modes it may not pick up the code at all), and a yellow Pair your devices label appears over it. Tap the label.
iPhone: the Camera over the PC's QR code, with the yellow "Pair your devices" label A card, not the app.
A card slides up"Pair your devices — Calls, messages, and notifications on your PC," with an Open button, "Powered by Link to Windows" and a small App Store › link in its bottom right corner.
This is the moment to tap App Store: it opens Link to Windows' App Store page (step 8 of the walkthrough). Install it, open it, and carry on from step 9, with the in-app scanner or the manual route.
Open loads the temporary copy instead, without installing anything.
iPhone: "Pair your devices: Calls, messages, and notifications on your PC." Open, with "Powered by Link to Windows" and App Store The temporary copy.
On your iPhoneIt opens on the same "Continue pairing with Bluetooth" screen as step 11, under a banner that gives it away: "Powered by Link to Windows — Link your phone and PC," with App Store › again, a second chance to install.
Apple calls these App Clips, and the iPhone names this one in the app switcher: "Link to Windows Clip." It isn't installed: there's no icon for it on your Home Screen, and it isn't listed in Settings.
iPhone: the temporary copy's banner, "Powered by Link to Windows: Link your phone and PC", App Store, over "Continue pairing with Bluetooth"
iPhone: the app switcher, showing "Link to Windows Clip" The Bluetooth question decides the rest.
Tap Continue and iOS asks "Allow "Link to Windows Clip" to find Bluetooth devices?", with the same map and wording as step 12.
Tapped "Don't Allow": the first dead end
On your iPhoneThe copy switches to "Bluetooth is required — To connect your phone with a nearby paired computer, Link to Windows requires Bluetooth permission," with Open app settings.
- That button opens the Apps list in iPhone Settings, and there's nothing to fix there: look under L for Link to Windows (it's never called Phone Link on iPhone) and it isn't listed, because it was never installed. You can't reopen the copy from your Home Screen either.
- All you can do is swipe it away in the app switcher and go back to the PC, where the 3-minute code has run out: "Your code has expired. Refresh QR code."
- Refresh it and scan again, and the copy remembers your "Don't Allow": instead of pairing, it shows "Enjoy calls, text messages, and more from your PC — On your PC open Phone Link and follow the instruction to link your device," which sends you back to the same QR code, or the manual link, and round again.
The way out: scan the QR code once more, and this time tap App Store on the card (or in the banner across the top of the copy). Install Link to Windows, open it, and carry on from step 9. The installed app is a separate app with its own permissions, so it asks about Bluetooth again; tap Allow.
Tapped "Allow": it pairs, then strands the iPhone
With Bluetooth allowed, the copy runs the same screens as the installed app, steps 12 to 14: "Looking for your PC to start Bluetooth pairing," the code on both screens (press Pair on both together), and the notifications prompt.
Then one button differsWhere the app offers Set up file sharing, the copy says "Share files between your iPhone and PC — To set up file sharing now, install Link to Windows and sign in with your Microsoft account," with Get Link to Windows and Set up later.
The copy can't share files at all: Get Link to Windows opens the App Store page, or tap Set up later here and Maybe later on the PC.
The PC then finishes normally: "You're almost there" (step 18), where either button opens Phone Link's connected screen.
The iPhone doesn't. The copy ends on "Your iPhone is paired with your PC — Go to Phone Link to finish granting notifications, messages, and contacts permissions," with no button, no menu and no home screen: a dead end, and the one Microsoft's PC screen led you into. Close it and it's gone from the iPhone.
Closing the copy doesn't undo the pairing: it stays on the iPhone and the PC. Swipe the copy away, install Link to Windows (any of the ways below) and open it: it opens already connected, straight onto its home screen (step 19), with no second pairing. File sharing still needs setting up from there: tap Sign in under Received files, or follow aka.ms/AddAccount.
Every way to install Link to Windows on an iPhone. They all end on the same App Store page, by Microsoft: tap Get (or the cloud icon, if you've had it before).
- Open the App Store, search Link to Windows, and pick the one by Microsoft.
- In Safari, type https://aka.ms/StartLinking into the address bar, tap Get started, then Continue (steps 5 to 8).
- On the card the Camera shows over the PC's QR code: App Store ›, bottom right.
- Inside the temporary copy: App Store › in the banner across the top.
- Inside the temporary copy, at the file-sharing screen: Get Link to Windows.
Find your exact problem
Bluetooth won't pair
iPhone links over Bluetooth, so this is a common sticking point.
- Make sure Bluetooth is on for both your iPhone and your PC, and that Link to Windows was allowed to use it (if it says "Bluetooth is required").
- Disconnect every other Bluetooth device from both, too (earbuds, a watch, another phone or PC): in my testing that alone cleared a lot of trouble (where to disconnect them).
- What not to do: pair the iPhone and PC by hand in Bluetooth settings to force it along. Tested, that leaves the iPhone stuck while the PC races ahead (what happens).
- If the pairing prompt never appears, clear the pairing on both sides and start over (Microsoft's four steps).
Everyone says: "make sure Bluetooth is on." You did. Your headphones work. It still won't pair, and the spinner just times out on both screens.
What's going on: Phone Link on iPhone needs Bluetooth Low Energy (BLE) specifically, not just ordinary Bluetooth. Some PC Bluetooth adapters handle regular Bluetooth perfectly and refuse BLE pairing, so every device you own connects fine and your iPhone alone won't. That's why "is Bluetooth on?" advice goes nowhere: Bluetooth is on. The adapter is the problem.
What to do: update the Bluetooth driver from your PC or motherboard manufacturer's site, not Windows Update, which often reports you're current when you aren't. Restart afterwards, and keep the iPhone right next to the PC while pairing. If your PC is older and its adapter predates BLE, a cheap USB Bluetooth 5.x dongle solves it outright. Also: PCs without BLE lose some calling features, so this can explain more than just pairing.
"Bluetooth is required" after tapping Don't Allow
Link to Windows shows"Bluetooth is required — To connect your phone with a nearby paired computer, Link to Windows requires Bluetooth permission," with Open app settings.
In the installed app, the fix is in iPhone Settings: open Settings → Apps (on iOS 17 and earlier, scroll to the bottom of Settings instead), find Link to Windows under L (on iPhone it's never called Phone Link), turn Bluetooth on, then go back to the app.
- If Link to Windows isn't in that list, you're in the temporary copy the Camera opened, which Settings can't fix: the way out.
"Unable to complete Bluetooth pairing" on both screens
This is what you get when Pair isn't pressed on both devices together (step 13), or the request times out.
On your iPhoneThe iPhone says "Unable to complete Bluetooth pairing — Try again to complete pairing your devices," with Try again and Having issues? Learn more.
The PC is more useful: it lists Microsoft's own clean-up.
Do all four; they clear the half-made pairing the failed attempt left behind.
In practice:
- On the PC, open Settings → Bluetooth & devices, click the ⋯ next to your iPhone and choose Remove device.
- On the iPhone, open Settings → Bluetooth, tap the ⓘ next to your PC's name, then Forget This Device.
- Switch Bluetooth off and back on with the switch at the top of Settings → Bluetooth on the iPhone (Control Center's Bluetooth button only disconnects accessories) and at the top of Settings → Bluetooth & devices on the PC, waiting the 10 seconds.
- Then click Try Bluetooth pairing again on the PC and Try again on the iPhone, and when the code appears, press Pair on both at the same moment.
iPhone stuck on "Looking for your PC" while the PC moves on
Pairing the iPhone and PC by hand in Bluetooth settings before setup looks like a shortcut. It isn't.
When I tried it, the setup did behave differently, but not for the better.
iPhone: After "Continue pairing with Bluetooth", the iPhone sat on "Looking for your PC to start Bluetooth pairing" with a spinner that never stopped,
while the PC moved on by itself to the file-sharing screen, showing progress and a successful connection.
Choosing Maybe later there opened a Phone Link dashboard that turned out dead, offline and glitched, and the iPhone never left its screen.
To get out of it: clear the hand-made pairing on both sides (Microsoft's four steps cover it: forget the PC on the iPhone, remove the iPhone on the PC, Bluetooth off and on), disconnect any other Bluetooth devices, then run the setup again from the start of the walkthrough and let Link to Windows make the pairing itself (step 13).
"Confirm the code shown on your PC"
This pairing code isn't emailed to you, and on iPhone there's nothing to type.
(The emailed 6-digit code is a different one: the Microsoft account check covered below.)
Because iPhone pairs over Bluetooth, your PC and your iPhone each display the same 6-digit number: your PC says "Pair device? Confirm that this code is shown on your iPhone®," and your iPhone shows a "Bluetooth Pairing Request."
Check the digits match, then press Pair on both at the same time, because the request times out (what a miss looks like).
(Android is different: there you type a code of letters and numbers from the PC, 8 characters on the no-QR route (aka.ms/PairPC) and 6 after scanning the QR code (www.aka.ms/LinkPhoneQR).)
"Your code has expired. Refresh QR code."
The QR code on "Pair your devices with Bluetooth" lasts 3 minutes, and it runs out fast if you stop to install the app.
- Click Refresh QR code for a new one, or skip the QR entirely: click Continue manually without a QR code and type the link on your iPhone (step 5).
- If you do scan it, scan from inside the installed app, not with the Camera (what the Camera opens).
"Verify your email" on iPhone: the address goes in that box
During the Microsoft account check (step 16 of the walkthrough), you may see the screen below. It's easy to skim it and go hunting for a code in your inbox, but nothing has been sent yet.
Type the full email address shown in the mask first, then press Send code; only then is the 6-digit code sent. It's the one code on the iPhone route that arrives by email.
- Check your spam folder; in my testing it often landed there.
- Use "Didn't get the code" to resend, and if it still doesn't come, choose "Use your password instead" on that screen (more on codes that don't arrive).
iPhone says paired, PC is still waiting
Prompts appear on both the iPhone and the PC. Tapping Continue on only one device desyncs the flow: one side shows connected while the other freezes. Work both screens together.
Still won't pair: reset it on both devices and start again
When restarts and retries keep failing, a half-made pairing is usually what's left behind. Clear it on both sides, then run the setup again from the top:
Clear the Bluetooth pairing on both devices. It's the clean-up the PC lists after a failed attempt: forget the PC on the iPhone, remove the iPhone on the PC, and switch Bluetooth off and on at both ends. Each one, tap by tap: Microsoft's four steps, in practice.
Removing the iPhone under Mobile devices instead isn't enough on its own: Windows' "Remove this device?" prompt there says it only takes the iPhone off the device list, and points to the same Bluetooth steps (the full prompt).
- If you installed the Link to Windows app, delete and reinstall it to reset it; otherwise just re-run pairing from the PC.
- Pair again from the start of the walkthrough, with every other Bluetooth device disconnected.
Removing the link for good rather than starting over? That's a different job: how to disconnect or remove Phone Link.
Once it connects
- Chose Set up later for file sharing? Link to Windows' Received files panel offers Sign in whenever you're ready, and aka.ms/AddAccount walks through it.
- Need a break from Phone Link later? Link to Windows on iPhone has no off switch, but your PC has one for any phone: how to pause it without unlinking.
And once it's connected, keep other Bluetooth devices to one at most, connected after Phone Link's first sync.
Remember that the iPhone feature set is smaller than Android's. Wondering whether to use an Android phone instead for the full experience? See the iPhone vs Android comparison.
A note on privacy
Pairing over Bluetooth carries only the features you switch on, and iPhone shares less than Android.
What the PC can see, and the one case where I'd say don't link at all: is Phone Link safe? To review or clear what Microsoft has stored, use the Microsoft Privacy Dashboard; personalized ads are switched off separately in Microsoft's ad settings. Official reference: Microsoft's Phone Link support page.
Known iPhone limits I hit in testing
- No app mirroring on iPhone. This is by Apple's design, not a bug; it's Android only. Why the iPhone gap exists →
- Bluetooth must stay on. The link runs over Bluetooth; if it's off, the connection drops.
- Outdated apps break pairing. Update Link to Windows on the iPhone and Phone Link on the PC; a version mismatch won't match Microsoft's rotating pairing signature. Keeping both apps updated →
- iOS 16.0 or later required; newer iOS connected more reliably in my testing. OS versions that run well →
Was this page helpful?
Thanks! If something on this page didn't work for you, the comments below are the quickest way to tell me.
Questions & answers
Comments are moderated: real setup questions get answered, and spam and links are removed.
FAQ
The link is on my PC screen. Why does my iPhone need it?
Because it's meant to be opened on the iPhone, not the PC. There it takes you to Link to Windows (through the App Store, if it isn't installed yet), which pairs with your PC over Bluetooth.
The Camera paired my iPhone, but Link to Windows isn't on it. Why?
Because the Camera didn't install it. Without Link to Windows installed, the Camera opens a temporary copy (the iPhone calls it "Link to Windows Clip") that can pair but not stay: it isn't on your Home Screen or in Settings. Install Link to Windows from the App Store and open it; if you finished pairing in the copy, the app opens already connected. Every screen, and the way out →
Why does my iPhone pair over Bluetooth?
iPhone connects to Phone Link over Bluetooth rather than the deeper link Android uses, so Bluetooth must be on for both devices.
Can I pause Phone Link on my iPhone without unlinking?
Not from Link to Windows: on iPhone it has no off switch. Use the switch next to your iPhone on Windows' Mobile devices page (Settings → Bluetooth & devices → Mobile devices), or turn Bluetooth fully off on the iPhone for the break. Disconnecting the PC in the iPhone's Bluetooth settings doesn't last; it reconnects on its own. Every way to pause it →
Can I mirror iPhone apps to my PC?
No. App mirroring is Android-only; Apple keeps that kind of integration for its own ecosystem. See the iPhone vs Android comparison for what iPhone can do.
Where's the code it asks for?
On both screens at once. iPhone pairs over Bluetooth, so your PC and your iPhone each show the same 6-digit number. Check they match and press Pair on both at the same time. This code isn't emailed, and there's usually nothing to type; the only emailed code is the one Microsoft sends to verify your account email. (Android is the one that uses a typed letters-and-numbers code.)
I have an Android phone. Am I on the wrong page?
Yes. Android uses aka.ms/PairPC, and that guide walks through every screen.
The email verification code isn't arriving.
Type the full email and press Send code first, then check spam, where it often lands. Press "Didn't get the code" to resend.
What does "Enable paste" do?
It lets Link to Windows read the link Microsoft's page copied when you chose Continue (step 7), so the app skips its welcome screen and goes straight to Bluetooth pairing. It's optional: "Continue without using my clipboard" costs you one extra screen. The link holds nothing about you or your devices.
Do I have to set up file sharing while pairing?
No. Choose Set up later on the iPhone and Maybe later on the PC; calls, messages and notifications work without it. Turn it on later from either device: Sign in under Received files in Link to Windows, or the "Share files between your devices" card on Phone Link's dashboard. aka.ms/AddAccount walks through both.
More for iPhone users: the iMessage catch · file transfer on iPhone · turn on iPhone file sharing · fixes when it won't connect · Assistive Access and other modes that block setup
Article updates
November 2026
- Re-verified on Link to Windows 1.26101.106.0 (Android) and 1.26101.20 (iPhone) and Phone Link 1.26092.119.0; added the byline at the top.
October 2026
- Clearer link text in place of "why" and "more", fewer repeats of the Bluetooth link, a pointer to what each permission is for, and "is Phone Link safe?" moved into the privacy note.
- Tidied repeats: the "reset it and start again" fix now points to the four clean-up steps above instead of repeating them, and the closing notes no longer restate step 17. Added the "Use your password instead" fallback for an email code that never arrives.
- Added iOS's paste question in step 9 (tap Allow Paste; iOS highlights Don't Allow Paste), the Camera's Photo mode, and links to the new file-sharing walkthrough on aka.ms/AddAccount. Step 16 now says how to pick the account rather than expecting it preselected.
- Withdrew the old tip to force pairing from the iPhone's Bluetooth settings: tested again, a pairing made by hand leaves the iPhone stuck on "Looking for your PC" while the PC moves on to a dead dashboard. Added the other Bluetooth devices to disconnect first, another way into Phone Link, and how to pause it on iPhone.
- Added what really happens when you scan the PC's QR code with the iPhone camera: a temporary copy the iPhone calls "Link to Windows Clip", its two dead ends, the way out, and every way to install the app. Corrected the old warning: the copy isn't cloud-based, and a pairing made in it carries over once you install the app.
- Rebuilt the walkthrough from a fresh run: every way to open Phone Link, the account check and the iPhone choice, Microsoft's exact PC screens, Link to Windows' new clipboard and welcome screens, iOS's Bluetooth and notification prompts, pressing Pair on both together, and both "Unable to complete Bluetooth pairing" screens.
- Added a clean-reset box for when pairing keeps failing: forget the PC in the iPhone's Bluetooth settings, reset Link to Windows, remove the iPhone on the PC, and pair again. Also told Android's two typed codes apart: 8 characters without a QR code, 6 after scanning one.
- Added the Link to Windows welcome screen ("Phone Link brings your phone to your PC") between the clipboard step and Bluetooth pairing: Scan QR code and Continue manually both lead to the same next screen, as do the PC's QR and manual options.
- Clarified the pairing routes: the manual route is typing the link on the iPhone. Pairing from iPhone Settings → Bluetooth is now described as a fallback trick to force pairing, not as the manual route.
- Added an early warning, next to the QR instructions, against scanning the PC's QR code straight from the iPhone camera.
- Told the two 6-digit codes apart: the Bluetooth code you match on both screens isn't emailed; the emailed one is the Microsoft account check.
- Corrected the iPhone feature list: photo and file transfer, but no photo browsing.
- Verified against Phone Link 1.26082.121.0, Link to Windows 1.26082.130.0 (Android) and 1.26092.10.0 (iOS).
August 2026
- Corrected the iPhone pairing code throughout: iPhone confirms a 6-digit Bluetooth code on both screens rather than typing an alphanumeric one (that's Android).
- Verified against Phone Link 1.26071.164.0, Link to Windows 1.26071.104.0 (Android) and 1.26081.28 (iOS).
- Tracking what changes across the apps themselves? That lives on the what's new in Phone Link timeline.
July 2026
- Reviewed and updated for the current Phone Link and Link to Windows versions.

![PC: "Your devices are paired: Share files between [your iPhone's name] and PC", with your account, Maybe later / Continue](ENTER_URL__aka-ms-startlinking-16-pc-share-files-between-your-iphone-and-pc.png)