Phone Link won't connect? Work through these in order

"Connection failed," "Bluetooth pairing failed," "link expired," or paired-but-not-connected: these can all have the same handful of causes. The order matters: start gentle, and only reach for the heavy stuff at the end. Don't throw every fix at it at once.

By , Founder & Author · From my own testing, plus reader reports marked as reports · Last verified November 10, 2026

Advanced steps involve system changes, so back up first.

0

First: is it Microsoft's servers?

Do this before anything else

Phone Link's secure cross-device transfer runs on Microsoft's servers, and sometimes those servers have a hiccup or a brief outage. If you happen to be linking right when that's happening, no amount of troubleshooting will help; the foundation itself is down.

You'll see the same scary errors on both Android and iPhone: connection failed, Bluetooth pairing failed, link expired.

Tested · when it's Microsoft, not you

The most important advice on this page: don't pile fix on fix when it might be the server. Give it time to resolve on its own, generally under an hour. In my testing, waiting roughly an hour was enough to get connected again. Don't blame your phone or PC; sometimes it isn't you.

If it's still broken after an hour, work down the list below. Need a file or some text across while you wait? The quick fallbacks don't need Phone Link at all.

Tested · check this before any fix

Disconnect every other Bluetooth device first. If your phone or your PC is connected to anything else over Bluetooth (another phone or another PC worst of all, but earbuds, a watch, a Bluetooth mouse or keyboard too), expect trouble at every stage: linking, syncing, file transfer, calls.

Disconnect them all on both devices and try again. Once it works, reconnect one at most, after Phone Link has done its first sync. Where to disconnect them, and the tested detail →

1

Reset the network it runs over

On mobile data / hotspot: airplane-mode trick

If you're connecting over a phone hotspot, mobile data sometimes behaves inefficiently.

Swipe down to Quick Settings (Control Center on iPhone) and turn on Airplane mode for at least 60 seconds, then turn it off. Works on both iPhone and Android, and it cleanly re-establishes the data connection.

On Wi-Fi: restart the router

Tested · restart the router, not just the apps

Turn your router/modem off and on, through its app or the physical switch. In my testing this made connections noticeably more reliable and smooth. (And keep both devices on the same network; it matters a lot.)

Same Wi-Fi, still nothing? Check "AP isolation"

A sneaky one that fooled me: your phone and PC can be on the exact same Wi-Fi and still be unable to see each other, because many routers have a setting, called AP isolation or Wireless isolation, that deliberately stops devices on the network from talking to one another. It's common on guest networks and some default router setups.

In your router's admin page (type the address printed on the router's label, often 192.168.0.1 or 192.168.1.1, into your browser, or open the router's app), look under Wireless → Advanced (menus vary by router) and make sure AP/Wireless isolation is turned off, then reconnect.

2

Check the hidden Windows toggle

Tested · the setting that's hard to find

Phone Link can be switched off in Windows, but the setting isn't labeled "Phone Link" and has no obvious on/off.

It's the first switch on Settings → Bluetooth & devices → Mobile devices, and it reads "Allow this PC to access content and capabilities from your mobile devices." If that's off, you must turn it on.

The catch: while it's off, none of the aka.ms shortcuts work except aka.ms/MobileDeviceSettings, which opens that exact page so you can flip it on. Pressing Windows key + R and running ms-settings:mobile-devices opens it too.

Phone Link won't even open from the link?

Three quick things.

  1. First, check you typed the link straight into the browser's address bar, not a search box: a search lists pages instead of opening the app, so the prompt never comes.
  2. Second, your browser may be blocking the app-launch prompt; allow the pop-up / "Open Phone Link" prompt and try the link again.
  3. Third, you can launch the app directly without a browser: press Windows key + R, type ms-phone: and press Enter. That only works if Phone Link is installed. If it isn't, open www.aka.ms/PhoneLink in your browser instead; searching the Microsoft Store doesn't find it.
3

Remove the device and re-pair

If your phone already shows as connected under Settings → Bluetooth & devices → Mobile devices but you're still having trouble, remove the device there (open your phone with the › at the right of its row; Remove is at the top right of its page) and run the pairing again from scratch.

A stale, half-broken pairing is a common culprit.

Also clear any half-built Bluetooth or Wi-Fi connections the devices made between themselves: find them by device type/name in your Bluetooth and Wi-Fi lists on both the phone and PC, then forget/disconnect them and start fresh.

on the PC, Settings → Bluetooth & devices for Bluetooth and Settings → Network & internet → Wi-Fi → Manage known networks for Wi-Fi.

on the phone, the Bluetooth and Wi-Fi pages in its Settings.

In my testing, restarting both apps fixed it first; if not, forgetting those stale connections did; only after that did I move to Repair/Reset.

Deliberately unlinking, or removed it and it's still syncing?

If you're removing the phone for good (not just re-pairing to fix a fault), the reliable way is from the phone, and there's a common trap where removing on the PC doesn't stop it syncing, with no error shown. Both are written out step by step, for Android and iPhone, in the dedicated guide: how to disconnect or remove Phone Link →

  • Only want a break? Don't remove anything: switch your phone off on Windows' Mobile devices page, which works for Android and iPhone, or in Link to Windows' Settings on Android.

Connected, but notifications aren't coming through?

That's usually a permission, not a connection.

On an Android phone, make sure notification access is enabled for Link to Windows (it's a special app permission, and where it sits varies by phone, so search your phone's Settings for "Notification access"), and turn off battery optimization for it, so the system doesn't kill it in the background: open Settings → Apps → Link to Windows → Battery and choose Unrestricted (some phones call it App battery usage).

On an iPhone, check the switches under Settings → Bluetooth: tap the (i) next to your PC's name and make sure Share System Notifications, Show Message Notifications and Sync Contacts are on (step 18 of the iPhone walkthrough).

Then restart both apps. Full permission rundown: what each app needs →

Tested · battery saver ≠ battery optimization

These get confused constantly, and they're two different switches.

Battery optimization is the per-app setting above.

Battery saver is the system-wide mode that kicks in when you're low, and Microsoft explicitly says to keep it off on both the phone and the PC, because it throttles the background activity the connection depends on.

  • on Android it's a Quick Settings tile, called Battery Saver or Power saving depending on the maker;
  • on iPhone it's Low Power Mode, under Settings → Battery;
  • on a Windows 11 laptop it's in Settings → System → Power & battery, where newer builds call it Energy saver.

This is a classic intermittent-fault cause: everything works, then your phone hits 20%, saver flips on automatically, and notifications quietly stop.

If your connection "only breaks sometimes," check the battery level when it happens.

Everything works except calls, or calls have no audio

Calls are the odd one out: they ride your PC's Bluetooth hands-free audio channel, separate from the Wi-Fi link everything else uses, which is why messages and notifications can be fine while calls fail.

Work through:

  1. confirm the phone is paired and connected in Windows Settings → Bluetooth & devices (paired-but-not-connected is enough for sync, not for calls);
  2. in Phone Link open Calls and complete the extra "set up" prompt if it's showing;
  3. check Windows' sound output/input (Settings → System → Sound) isn't pointed at another device mid-call;
  4. and if audio still routes to the phone or drops, remove the Bluetooth pairing on both sides and re-pair.

Bluetooth audio is also the first thing wonky USB Bluetooth dongles break; a PC with flaky Bluetooth will show exactly this "everything but calls" pattern.

"Phone Link has been blocked by your system administrator"

Two very different causes behind one message.

If your PC or Microsoft account is organization-managed (work or school), this is usually an intentional admin policy, not a fault; details and what to expect: work & school accounts →.

But it also hits personal PCs: check Settings → Accounts → Access work or school for a leftover organization account you can disconnect (then restart), make sure third-party security software isn't blocking the app, and if you're on a fresh Windows install, note that a stray policy can ship enabled.

The deeper Group Policy / registry cleanup is possible but fiddly, so exhaust the simple checks first. If the PC belongs to an organization, only its admin can unblock it.

Everything works except the phone screen or Apps

Mirroring asks more of your setup than messages and notifications do, so a healthy link doesn't prove your phone can mirror. Check these in order:

  • Look in the right place. In Phone Link on the PC, the full mirror opens from Apps → Open phone screen, in a window of its own rather than inside Phone Link.
  • Support. Only phones with Link to Windows built in get the phone screen and Apps. If yours came from the Play Store, nothing in Phone Link will add them. The five-second check →
  • The PC's graphics. Microsoft requires a DirectX 11-capable GPU, which only older or very light PCs lack. The hardware gate →
  • Wi-Fi, not Bluetooth. The screen streams over Wi-Fi, so both devices need the same network: the phone off mobile data, not on a guest network, and no AP isolation (above). Removing Bluetooth pairings won't help here, and it breaks calls until you pair again.
  • Battery optimization off for Link to Windows. Aggressive power management can end the session when the phone idles (Settings → Apps → Link to Windows → Battery → Unrestricted, as in the notifications fix above).

Mirroring works, but one app is just a black rectangle

Not a bug, and no fix, by design. Why this happens →

Apps with hardware DRM or banking-grade screen protection refuse to be recorded, and mirroring is screen recording. Banking apps and streaming services are the usual ones. Audio may keep playing while the picture stays black.

Don't reinstall anything; use those apps on the phone directly.

To confirm, open a plain app such as Settings inside the mirror:

  • If that shows, the other app is the one blocking capture.
  • If everything is black, go back to the checks above.

Link to Windows vanished from your phone, or won't install

If the app has disappeared, or the store says it isn't compatible with a phone that worked before, this may not be fixable.

Microsoft maintains a supported-device list, and devices get removed from it.

Once yours drops off, Link to Windows can become incompatible and disappear, with no supported way back; it isn't a corrupted install, and reinstalling won't help. Support is also gated by market, so the same model can qualify in one country and not another. Which phones get what →

4

This is the fix for the maddening one: both devices say they're Bluetooth-paired, but Phone Link insists it's not connected. No third-party tools needed.

On your Windows 10/11 PC

  1. Go to Settings → Apps, scroll to the bottom and open System components. (On Windows 10, go to Settings → Apps → Apps & features instead.)
  2. Search "Phone Link," click the three dots beside it, then Advanced options.
  3. Scroll down. First click Terminate to fully close the app.
  4. Under Reset, click Repair first. Test it.
  5. If it's still off, click Reset.

I did Repair, then Reset, and it came back working. It didn't even ask me to pair again, since I'd never disconnected; it had just glitched itself into a bad state.

⚠ Why "Repair" keeps failing

If Repair returns "Repairing failed, please try again after some time," it's almost always because Phone Link is still running and can't be repaired while live.

Restarting the PC won't help: Windows 10/11 keep two startup processes, Phone Link and Mobile Devices, that relaunch the glitched app on every boot.

The fix: go to Settings → Apps → Startup, turn both off, restart the PC, and then Repair. It worked flawlessly for me after that.

Turn them back on once you're connected, since they matter for normal use. (Clicking Terminate first gave no success or error prompt, just dead clicks, so don't rely on it alone.)

On your phone (Link to Windows)

Android: go to Settings → Apps → Link to Windows → Storage, tap Clear cache first; if needed, Clear data/storage (this signs you out, so you'll re-pair). Force-stopping the app first also helps.

Clearing Link to Windows' data here together with resetting Phone Link on the PC (above) is, in my testing, the best way out of a glitched link or a failure that keeps coming back.

iPhone: iOS has no per-app repair, so the equivalent is to delete the Link to Windows app and reinstall it from the App Store, then pair again.

5

For a stubborn bad connection, clearing Phone Link's LocalState folder (the app's working data) is more thorough than a reset and can clear issues a reset won't. I tested this on a connection that was stuck, and it brought it back.

  1. First close Phone Link completely (end it in Task Manager, which Ctrl + Shift + Esc opens, if it's still running).
  2. Then open a normal PowerShell window (type PowerShell in the Start menu search and click Windows PowerShell, not Run as administrator) and run the command below.

It doesn't need Administrator rights, because the folder is in your own user profile.

PowerShell (normal window, Phone Link closed)Remove-Item -Path "$env:LOCALAPPDATA\Packages\Microsoft.YourPhone_*\LocalState" -Recurse -Force

Then restart the PC. (Phone Link's package is still named "YourPhone" under the hood, so that path is correct.)

⚠ Advanced: back up first

This deletes Phone Link's local data, so you'll re-pair afterward. Run it from your own account in a normal PowerShell window, not as Administrator (an administrator account other than yours would clear the wrong profile), and if you're not comfortable with commands, stick to the Repair/Reset in Step 4 instead.

6

Full clean reinstall (last resort)

If nothing above worked, a complete removal and reinstall is the final step before contacting Microsoft.

With Revo Uninstaller (Portable)

  1. Run Revo Uninstaller Portable and remove Phone Link plus its leftover registry entries. Always accept the System Restore point when Revo prompts; that's your safety net.
  2. Then reinstall Phone Link (the button below), and turn the "Allow this PC to access content and capabilities from your mobile devices" toggle back on: it's the first switch on Settings → Bluetooth & devices → Mobile devices (step 2).
Reinstall Phone Link Get Revo Uninstaller (free)
✕ Tested · do NOT uninstall Phone Link with winget

It's tempting to remove Phone Link with a winget command in PowerShell. Don't. In my testing the uninstall succeeded but Phone Link could not be reinstalled afterward; the only way to get it back was a full Windows reset. Use the Repair/Reset or the Revo method instead.

Tested · an unusual one that works

A more unusual approach I've used to force a stubborn connection: USB tethering.

  1. Plug the phone into the PC with a USB cable and turn on USB tethering on the phone (it sits with the hotspot settings: Settings → Network & internet → Hotspot & tethering on a Pixel, Settings → Connections → Mobile Hotspot and Tethering on a Galaxy; names vary), so it shows up on the PC as a new "router" device.
  2. Then disable your main internet (switch the PC's Wi-Fi off, or unplug its network cable) and leave the phone's USB routing as the only connection, then open Phone Link, and it connects.
  3. Once linked, switch your main internet back on and use it normally.
7

Still stuck? Talk to Microsoft

If you've worked through all of the above and it still won't connect, this is the point to contact a Microsoft live chat agent; it may be an account- or server-side issue only they can see. That's the last resort, not the first move.

Did this get you connected?

Questions & answers

Comments are moderated: real questions get answered, and spam and links are removed. Found a fix that worked for you? Share it; if I can reproduce it, I may add it here.

Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted

FAQ

My PC gets slow and Cross Device Service is eating memory.

A long-running set of user reports, going back to 2023 and not formally confirmed by Microsoft, describes Cross Device Service consuming enormous amounts of RAM (reports range from 15 GB to about 30 GB) until the machine crawls. What hides the cause: this is the background broker for clipboard sharing, notification sync and Resume, so closing the Phone Link window doesn't stop it, and the name in Task Manager doesn't say "Phone Link". Reversible ladder, in order: update Windows, Phone Link and the phone-side app; end Cross Device Service in Task Manager (containment only; it can restart); disable the Mobile devices entry under Task Manager → Startup apps; or unlink Phone Link entirely. Do not use removal scripts or delete Windows packages; Phone Link is deeply integrated and forced removal can break servicing. The cost of mitigating is losing clipboard sharing, notification sync and Resume.

Is a big Phone Link number in Task Manager a memory leak?

Not on its own. Microsoft hasn't confirmed a Phone Link memory leak, and Windows keeps memory in use that it can hand back, so a single high reading proves little. What counts is a pattern: note what Phone Link and Cross Device Service use right after launch, after 15 to 30 minutes idle, and after normal use. If it climbs every time and ending the task brings it back down, work through the ladder in the answer above. Don't add every WebView2 or Runtime Broker entry to its total, since other apps use those too; close Phone Link and watch what actually drops. To report it, open Feedback Hub (Windows key + F) and include your Windows build, Phone Link version, phone model and those readings.

Windows keeps showing a "Microsoft account problem" notification.

That prompt covers several different conditions, one of which is a Phone Link pairing mismatch. Before you unlink and re-pair anything, check that Phone Link and Link to Windows are signed in with the same Microsoft account (that's the pair that has to match; Windows itself can use a local account: which account counts), then look for Windows' account repair prompt. On Windows 10 it's in Settings → System → Shared experiences, where a Fix now button can appear under Accounts. On Windows 11 that setting moved to Settings → Apps → Advanced app settings → Share across devices, and account fixes show up under Settings → Accounts. Run the repair first; it resolves the account-state version of this without touching your pairing.

Phone Link says "connection failed." Is it my fault?

Not necessarily. Microsoft's servers occasionally have outages, and the same errors appear on both Android and iPhone when that happens. Wait up to an hour before troubleshooting your devices.

Both devices say paired, but Phone Link says not connected.

Repair, then reset Phone Link in Settings → Apps → System components → Phone Link → Advanced options (Terminate first). If that fails, clear its LocalState folder, then as a last resort do a clean reinstall.

I can't find a "Phone Link" on/off setting in Windows.

It's labeled "Allow this PC to access content and capabilities from your mobile devices," and it's the first switch on Settings → Bluetooth & devices → Mobile devices. aka.ms/MobileDeviceSettings opens it directly.

The Android (or iPhone) button does nothing when I add a second device.

Not you, and not your phone. With one platform already linked, I clicked Add a mobile device on Windows' Mobile devices page (Settings → Bluetooth & devices → Mobile devices), and on the Android-or-iPhone choice that opens, the other platform's button didn't open the next screen; adding a second phone of the same type works fine. Unlinking didn't clear it; a PC restart after removing the device did. The platform lock, tested →

Can I uninstall Phone Link with winget?

Avoid it. In testing the winget uninstall worked but Phone Link couldn't be reinstalled, requiring a full Windows reset. Use Repair/Reset or Revo Uninstaller instead.

Phone Link disconnects every time my PC wakes from sleep.

I see this too, and Microsoft has acknowledged it (what they've said), but there's no fix yet. What helps is keeping the phone side alive while the PC sleeps: turn off battery optimization for Link to Windows (Settings → Apps → Link to Windows → Battery → Unrestricted; names vary by phone).

On a Samsung, also check it isn't in the sleeping or deep sleeping apps lists (Settings → Battery → Background usage limits; Device care → Battery on older One UI). Then update both apps. If the link still doesn't come back, open Link to Windows on the phone and Phone Link on the PC to reconnect.

"Your Android device went to sleep. Wake it up," and the button does nothing.

The PC is asking for something the phone's power management has already killed. Unlock the phone and open Link to Windows so it's foreground, turn off battery optimization for it (Settings → Apps → Link to Windows → Battery → Unrestricted; names vary by phone), and try again; if the button still does nothing, restart both apps and reconnect. Users report this appearing after major Android/One UI updates too; see the next answer.

A big phone update (like One UI) just landed and now it won't connect.

A recurring pattern users report after major Android updates: permissions and background exemptions get reset or re-interpreted, and the old pairing goes stale. Re-grant Link to Windows' permissions and battery exemption first (both are in your phone's Settings → Apps → Link to Windows, under Permissions and Battery); if that doesn't do it, remove the link on both sides and pair fresh. Full steps are in the disconnect guide.

Phone Link keeps crashing on the PC (PhoneExperienceHost errors).

PhoneExperienceHost.exe is Phone Link's process. If Windows' Event Viewer shows it faulting, that's an app-corruption problem, not a pairing problem. Go straight to Step 4's Repair, then Reset; the local-data deletion in Step 5 is the deeper version of the same fix.

People say Phone Link froze their phone. Can that happen?

There have been credible user reports (notably on some Galaxy models) of phones becoming intermittently unresponsive with Phone Link connected, recovering once the PC app closes. I haven't reproduced it on my devices, so I won't claim it as tested, but if your phone freezes only while linked, the diagnostic is easy: turn Link to Windows off for a day. If the freezes stop, unlink and re-pair cleanly, and keep the phone-side app updated.

"File failed to send. We are unable to reach [my PC name]."

Sent from an iPhone via Link to Windows? Then this message is pointing at the wrong device. Your PC isn't blocked or unreachable; file sharing is refusing because the iPhone is signed in with a different Microsoft account from the PC. Everything else keeps working, which is why it's so easy to misread. Don't touch your firewall or network: check the account on both devices →

"Send to my phone" asks me to sign in, or does nothing.

On iPhone it means file sharing isn't working on this link, for one of two reasons: it was never set up (Set up later during pairing, or a pairing done in the temporary copy the iPhone's Camera opens), or the iPhone is signed in with a different Microsoft account from the PC. Everything else keeps working, so the link looks healthy, and Windows only says so at the moment you try to send. "Maybe later" closes the window without sending; Continue runs the setup. Which one it is, and the fix →

My phone finished pairing, but the PC never connected.

Classic mismatched-account symptom. If you signed in on the phone with a different Microsoft account from the one on your PC, the phone-side flow completes convincingly while the PC never moves, and the final screen is blurred, with a panel saying "Almost there! Let's add your PC… sign in with [your email]." That panel is a failure notice. The full tested detail and the fix → (The same panel appears when your PC has dropped off Link to Windows; that case has its own way through: when Phone Link opens on your old phone.)

"Invalid QR code" when I scan the QR from "We can't find [my phone]".

That's Phone Link's reconnect QR, and in my testing it was refused every time. Get a fresh linking QR instead: in Phone Link, click the gear at the top right, then Mobile devices → Add device, and choose Android. Or unlink both ends and link fresh. The reconnect QR, tested →

"Something went wrong. Try again after sometime." while re-adding a PC.

I got this half the time when linking a phone again to a PC it had been linked to before, with Link to Windows still signed in. Sign out of Link to Windows first, then add the PC again; if it keeps coming back, clear Link to Windows' data and reset Phone Link (Step 4 above). More on re-adding a PC →

Do both devices need the same Microsoft account?

On Android, yes: the phone and PC must be signed in to the same Microsoft account, and a mismatch is a common cause of failures. On iPhone the link pairs over Bluetooth, so a different account doesn't stop it; it breaks file sharing only (how that shows up). Compare the account on each side: on the PC, Windows lists it under your phone's name on Settings → Bluetooth & devices → Mobile devices (Phone Link's welcome screen shows it too); on the phone, tap the profile icon (top-left) in Link to Windows on Android, or go to menu → Settings → Account on iPhone.

Pairing won't accept my code / I'm locked out.

Too many failed attempts to match the code between PC and phone will block linking for a while, for security. Close and reopen Phone Link on your PC and start setup again. See also the QR-code fixes.

Could another app be blocking the connection?

Yes. Other phone-to-PC linking tools can conflict: Intel Unison (discontinued, but it may still be installed), a manufacturer app like Virtoo by LG, or Samsung's old DeX for PC app on a phone that still has it (Samsung ended DeX for PC with One UI 7). Close, disable, or sign out of them, remove the pairing, and link again. More on DeX and Phone Link.

Did you rename your phone or PC recently?

Renaming either device can invalidate the stored pairing, so syncing quietly stops. Remove the pairing on both sides (forget the PC in your phone's Bluetooth settings, and remove the phone under the PC's Bluetooth & devices), then pair again so both sides register the new name.

My iPhone is stuck on "Looking for your PC to start Bluetooth pairing."

Usually because the iPhone and PC were already paired by hand in Bluetooth settings before setup. In my testing that leaves the iPhone spinning on that screen while the PC moves on by itself, to a Phone Link dashboard that turns out dead and offline. Clear the pairing on both sides and run the setup again, letting Link to Windows pair them itself, with every other Bluetooth device disconnected. What pairing by hand does →

On iPhone, could Low Power Mode or Background App Refresh be the cause?

Yes. Both are easy to miss on iPhone. Low Power Mode throttles the background activity Phone Link depends on, so syncing and notifications can stall; switch it off while you're connected. And Background App Refresh has to be on for Link to Windows; check Settings → General → Background App Refresh and make sure it's enabled, then reconnect.

I can't find Phone Link in the Microsoft Store.

It's a known trap: the Store's search doesn't surface Phone Link, even though the app is there and its page opens fine by direct link. Don't search the Store. Use www.aka.ms/PhoneLink in your PC's browser or search "Phone Link" in the Start menu; both land on the app directly. (ms-phone: opens it too, once it's installed.) The Store search trap, tested →

I set it up during Windows' first-run, and now it's glitchy. Is that why?
Tested · never pair during Windows first-run

Very likely. In my testing, pairing during the out-of-box experience (OOBE) was far more prone to half-connecting and glitching than pairing from the desktop. Remove the link cleanly, either from the phone (Link to Windows → profile → Settings → See your PC → ⋯ → Remove) or with the "Add a mobile device" reset on the PC (both are in the disconnect guide). Then finish Windows setup fully and pair again from the desktop.

Keep reading: disconnect or remove Phone Link · requirements & specs · device modes that block setup · tested alternatives

Aaron Kransdorf, founder of SyncYourDevice

Aaron Kransdorf

Founder & Author of SyncYourDevice, based in Traverse City, Michigan. I built SyncYourDevice.com after nearly eight years in IT support and mobility engineering, when these pairing failures stranded me too: if someone who fixes this for a living was getting stuck, plenty of people were getting stuck worse. So I test every flow on my own devices (five phones, two Windows PCs) and re-verify each guide when the apps change. What I haven't tested is labeled Documented, with its source, and reader reports are marked as such. I answer Phone Link questions in the Microsoft Q&A, Apple and Google communities.

Tested on: Link to Windows (Android) 1.26101.106.0 · (iOS) 1.26101.20 · Phone Link (Windows) 1.26092.119.0 · verified November 10, 2026.

About · Credentials · X · LinkedIn · Microsoft Q&A · Apple Community · Google Help Community

Article updates

November 2026

  • Re-verified on Link to Windows 1.26101.106.0 (Android) and 1.26101.20 (iPhone) and Phone Link 1.26092.119.0; added the byline at the top.
  • Added what to do when Phone Link drops the phone every time the PC wakes from sleep (Microsoft has acknowledged it; no fix yet).

October 2026

  • Clearer link text in place of "why", "how" and "the tested detail", and a pointer to quick fallbacks while you wait out an outage.
  • Corrected two account answers: on iPhone a different Microsoft account doesn't stop the link, it breaks file sharing only; and the account that has to match is Phone Link's, not necessarily Windows' own.
  • Updated the "Send to my phone" answer: on iPhone the sign-in window also means file sharing was never set up, not only an account mismatch.
  • Added the check to do before any fix: disconnect every other Bluetooth device from the phone and the PC. Also covered an iPhone stuck on "Looking for your PC", and the PC's switch that pauses either phone for a break.
  • Every fix now says where its setting lives: the Mobile devices master switch, notification access and battery settings on Android and iPhone, battery saver on each device, the router's admin page, a normal PowerShell window and USB tethering.
  • Added the pause option next to the unlinking pointer: switch Link to Windows off in its Settings rather than removing the PC.
  • Added the Run-box shortcut to the Mobile devices page: Windows key + R, then ms-settings:mobile-devices.
  • Updated the hidden Windows switch to the label Windows shows now: "Allow this PC to access content and capabilities from your mobile devices".
  • Added two error messages from re-adding a PC, "Invalid QR code" (the reconnect QR) and "Something went wrong. Try again after sometime.", and noted that clearing Link to Windows' data with a Phone Link reset is the best way out of a glitched link.
  • The "link doesn't open Phone Link" fix now starts with the commonest cause: the link typed into a search box instead of the address bar.
  • Added a check for when everything works except the phone screen or Apps (including where the phone screen opens), a quick test for the one-black-app case, and how to tell a real memory problem from a big Task Manager number.
  • Removed advice to check account.microsoft.com/devices. In my testing that page shows nothing about Phone Link links.
  • The LocalState cleanup now runs in a normal PowerShell window after closing Phone Link; the folder is in your own profile, so Administrator isn't needed.
  • Added the Windows 11 location of the shared-experiences settings, the Windows 10 path for Repair/Reset, and Microsoft's contact page for live chat.
  • Corrected ms-phone:, which opens Phone Link only when it's installed, and removed an unconfirmed line about lockouts switching you to accepting permissions.
  • Verified against Phone Link 1.26082.121.0, Link to Windows 1.26082.130.0 (Android) and 1.26092.10.0 (iOS).

August 2026

  • Added tiers for call/audio failures and the "blocked by your system administrator" message, plus FAQs for sleep/wake, post-update breakage, PhoneExperienceHost crashes, reported phone freezes, Cross Device Service memory reports and the Microsoft account repair path.
  • Verified against Phone Link 1.26071.164.0, Link to Windows 1.26071.104.0 (Android) and 1.26081.28 (iOS).
  • Tracking what changes across the apps themselves? That lives on the what's new in Phone Link timeline.

July 2026

  • Reviewed and updated for the current Phone Link and Link to Windows versions.